Extend your low-end with this portable powerhouse. Whether used on its own or with a sub, the ZLX-15P provides crisp, clean highs and tight, deep lows for larger spaces – all with enough amplifier headroom to make sure you’re heard both loudly and clearly.
The compact, lightweight ZLX-12P was designed to give you power and performance beyond the scope of other small-format loudspeakers, making it a standout choice for smaller-venue sound reinforcement or stage-monitoring. Pound for pound, no other similarly sized composite box comes close.
HCS-118B and HCS-118NB are powerful 18” subwoofers with excellent price / performance ratio. We supply them as HCS-118B equipped with a ferrite chassis or as HCS-118NB with a high performance Neodymium chassis and 1500W AES. The housing is equipped with two handles and a top mounted M20 threaded top hat. It is made of high quality multipl
HCS-118B and HCS-118NB are powerful 18” subwoofers with excellent price / performance ratio. We supply them as HCS-118B equipped with a ferrite chassis or as HCS-118NB with a high performance Neodymium chassis and 1500W AES. The housing is equipped with two handles and a top mounted M20 threaded top hat. It is made of high quality multiplex wood and coated with a strong anti-scratch Polyurethane paint. The 4mm thick aluminum back panel is stocked with two NL-4 sockets to connect the amplifier or a second sub.
The Martin Audio S18+ Blackline speaker is a compact sub-bass system and has been designed to be used with Martin AudioF12+ or F15+ full-range systems to extend and increase the total low frequency output power.
The S18+ provides good bass punch from a new, long-excursion, 15” (380mm)/4” (100mm) voice coil driver with a water resistant con
The Martin Audio S18+ Blackline speaker is a compact sub-bass system and has been designed to be used with Martin AudioF12+ or F15+ full-range systems to extend and increase the total low frequency output power.
The S18+ provides good bass punch from a new, long-excursion, 15” (380mm)/4” (100mm) voice coil driver with a water resistant cone and triple roll surround.
The Martin Audio S18+ is provided with a top hat fitting that can be used to pole mount an F10+ or F12+ above the enclosure.
The Martin Audio F12+ is a very high powered, compact two-way system with a new, vented-chassis, 12” (300mm) LF driver and a new 1” (25mm) exit compression driver mounted on a rotatable 80° x 50° constant directivity HF horn.
This LF driver has a tough, water resistant cone and also features a high BL motor with a flat-wire copper coil and
The Martin Audio F12+ is a very high powered, compact two-way system with a new, vented-chassis, 12” (300mm) LF driver and a new 1” (25mm) exit compression driver mounted on a rotatable 80° x 50° constant directivity HF horn.
This LF driver has a tough, water resistant cone and also features a high BL motor with a flat-wire copper coil and an aluminium demodulating ring. This ring reduces intermodulation distortion and improves midrange performance when driven hard.
Increased excursion is available by virtue of a triple roll surround and deep motor structure.
The directivity of the LF driver has been matched to the HF horn in the crossover region by improved crossover design and cone profile optimisation. The new HF compression driver also utilises an ultra-lightweight Kapton diaphragm for extended high frequency response.
The Martin Audio M3+ or DX1.5 Electronic Controller is available to provide F12+/subwoofer crossover and limiter facilities.
Please call us at Old Barn Audio on 01892 752246 if you have any questions, or would like to buy either a Martin Audio f12+ high power speaker system or any other product from the Blackline range.